【初探篇】Nginx的安装部署
文章目录
相关软件下载地址:链接:https://pan.baidu.com/s/12VmjEzxEKeiwrONceaWguA?pwd=aaaa 提取码:aaaa
虚拟机安装
- 虚拟机:vmware
- 操作系统:CentOS-7.4
下载地址:
虚拟机安装CentOS7.4
1 新建虚拟机
2 选择典型
3 选择CentOS镜像
我们在这次学习时使用mini版操作系统镜像,安装速度快,也去除了我们用不到的软件。
4 存储位置
5 虚拟机磁盘配置
6 自定义其他配置
在自定义硬件中,我们可以再次配置虚拟机的内存、cpu等硬件属性:
电脑配置
内存:建议8G以上
CPU:4核以上主流即可
系统安装
1 虚拟机配置完成之后进入系统安装界面
出现此界面后敲“回车”进入安装程序
2 选择安装语言
3 分区选择
虽然默认会自动帮我们格式化磁盘,但也需要点击确认一下。
点击左上角完成即可
4 开始安装
安装过程中我们可以设置密码
5 安装完成
当出现 重启 按钮时,说明系统已经安装完成
重启后的样子
至此,我们在VMware中对CentOS的基本安装已经完成。
Linux配置
配置上网
- 修改配置网卡配置文件
vi /etc/sysconfig/network-scripts/ifcfg-ens33
-
修改ONBOOT=yes
-
重启网络服务
systemctl restart network
-
测试
ping qq.com
至此,我们的虚拟机就可以访问互联网了。
配置静态ip
查看本地ip:
之前的网络配置是使用dhcp方式分配ip地址,这种方式会在系统每次联网的时候分配一个ip给我们用,也就是说有可能系统下次启动的时候ip会变,这样非常不方便我们管理。
网段和网关可以通过以下方式查看:
配置静态ip首先需要打开网卡配置文件
vi /etc/sysconfig/network-scripts/ifcfg-ens33
- 修改启动协议 BOOTPROTO=static
- 手动配置ip地址
TYPE=EthernetPROXY_METHOD=noneBROWSER_ONLY=noBOOTPROTO=staticDEFROUTE=yesIPV4_FAILURE_FATAL=noIPV6INIT=yesIPV6_AUTOCONF=yesIPV6_DEFROUTE=yesIPV6_FAILURE_FATAL=noIPV6_ADDR_GEN_MODE=stable-privacyNAME=ens33UUID=d768f819-cfc1-4a6d-8bf5-cd7359a86c75DEVICE=ens33ONBOOT=yes# IP地址 (根据自己的环境修改)IPADDR=192.168.8.101# 子网掩码NETMASK=255.255.255.0# 网关(根据自己的环境修改)GATEWAY=192.168.8.2#DNSDNS1=223.5.5.5
完整配置截图如下:
环境不同,ip地址可能不同,所以需要安装自己的ip网段和网关地址进行配置。
- 接下来重启网络服务
systemctl restart network
查看ip地址,发现ip地址已经变成固定ip 192.168.8.101:
不能上网的错误排查
•vmware中网关是否正确
•直接ping ip是否能通(物理连接排查)
•卸载重装
一些公网DNS服务器
#阿里223.5.5.5223.6.6.6#腾讯119.29.29.29182.254.118.118#百度180.76.76.76#114 DNS114.114.114.114114.114.115.115#谷歌8.8.8.88.8.4.4
Centos7 防火墙的关闭
CentOS 7.0默认使用的是firewall作为防火墙
查看防火墙状态
firewall-cmd --state
停止firewall
systemctl stop firewalld.service
禁止firewall开机启动
systemctl disable firewalld.service
放行端口
firewall-cmd --zone=public --add-port=80/tcp --permanent
重启防火墙
firewall-cmd --reload
宝塔Linux面板安装教程
参考:https://www.bt.cn/bbs/thread-19376-1-1.html
安装命令:
yum install -y wget && wget -O install.sh http://download.bt.cn/install/install_6.0.sh && sh install.sh
安装成功的截图如下:
一定要保管好链接和用户名、密码。
外网面板地址: http://183.208.21.74:8888/f5ec0b77内网面板地址: http://192.168.8.101:8888/f5ec0b77username: 5ano3drcpassword: cd9e6a03
安装好进行访问:
面板卸载:
/etc/init.d/bt stop && chkconfig --del bt && rm -f /etc/init.d/bt && rm -rf /www/server/panel
Nginx的安装
版本区别
常用版本分为四大阵营
- Nginx开源版
http://nginx.org/
- Nginx plus 商业版
- openresty
http://openresty.org/cn/
- Tengine
http://tengine.taobao.org
Nginx的安装可以选择源码编译的方式也可以使用宝塔面板安装,本文采用的是源码编译安装。
使用源码编译安装
tar zxvf nginx-1.21.6.tar.gzcd nginx-1.21.6./configure --prefix=/usr/local/nginx # --prefix=/usr/local/nginx 指安装路径是/usr/local/nginx,如果前面安装了宝塔Linux面板,这一步应该不会出现环境问题。makemake install
如果出现警告或报错
提示:
checking for OS+ Linux 3.10.0-693.el7.x86_64 x86_64checking for C compiler ... not found./configure: error: C compiler cc is not found
安装gcc
yum install -y gcc
提示:
/configure: error: the HTTP rewrite module requires the PCRE library.You can either disable the module by using --without-http_rewrite_moduleoption, or install the PCRE library into the system, or build the PCRE librarystatically from the source with nginx by using --with-pcre=<path> option.
安装perl库
yum install -y pcre pcre-devel
提示:
./configure: error: the HTTP gzip module requires the zlib library.You can either disable the module by using --without-http_gzip_moduleoption, or install the zlib library into the system, or build the zlib librarystatically from the source with nginx by using --with-zlib=<path> option.
安装zlib库:
yum install -y zlib zlib-devel
接下来执行
makemake install
启动nginx
进入安装好的目录 /usr/local/nginx/sbin
./nginx # 启动./nginx -s stop #快速停止./nginx -s quit #优雅关闭,在退出前完成已经接受的连接请求./nginx -s reload #重新加载配置
安装成功的截图如下:
安装成系统服务
在如下位置创建服务脚本nginx.service
vi /usr/lib/systemd/system/nginx.service
服务脚本内容如下(注意路径要对应,这里的路径是/usr/local/nginx/sbin):
[Unit]Description=nginx - web serverAfter=network.target remote-fs.target nss-lookup.target[Service]Type=forkingPIDFile=/usr/local/nginx/logs/nginx.pidExecStartPre=/usr/local/nginx/sbin/nginx -t -c /usr/local/nginx/conf/nginx.confExecStart=/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.confExecReload=/usr/local/nginx/sbin/nginx -s reloadExecStop=/usr/local/nginx/sbin/nginx -s stopExecQuit=/usr/local/nginx/sbin/nginx -s quitPrivateTmp=true[Install]WantedBy=multi-user.target
重新加载系统服务
systemctl daemon-reload
启动服务
systemctl start nginx.service
开机启动
systemctl enable nginx.service
测试,访问http://192.168.8.101/:
使用宝塔面板安装
宝塔面板安装的版本不是nginx的开源版本,作为学习,建议使用源码编译安装,熟练了再使用宝塔版的nginx。
参考文档
Nginx参考文档:https://www.w3cschool.cn/nginx/nginx-d1aw28wa.html